Speedy-Seal Link StopperThe Non-Acid, Biodegradable Dissolver! Use on Tools, Clothes, Equipment and More!

SPEEDY CLEAN Concrete & Mortar Dissolver is a totally non-acid product that is 100 % biodegradable and will dissolve, making easily removable, any Portland Cement based product. Designed to turn concrete, mortar, stucco, or grout into a soft mush, it can be used on tools and equipment avoiding chipping and harsh acids.

Available in 22 fl. oz. spray, 5 gallon pails, 55 gallon drums and 275 gallon totes.

Companies using Speedy Clean Concrete & Mortar Dissolver

10 reasons why they use it:

Available in these sizes:
22oz Spray Bottles (12 per case)
5 gallon pails
55 Gallon drums
275 gallon totes

Sell Sheet

Material Safety Data Sheet


Seeing is believing! (See photos below and Powerpoint.)

Start with concrete block...then apply SPEEDY-CLEAN CONCRETE & MORTAR DISSOLVER...

(BELOW) See concrete actually falling apart after merely 4 hours...


Clean concrete and mortar from trowels, hand tools, mixers, screeds, pumps, scaffolds, mud tubs, mud boards, trucks, trailers, and silos, saws, drills, and generators

Speedy Clean Concrete Dissolver FAQ

Who Uses Speedy Clean Concrete Dissolver?
Speedy Clean Concrete Dissolver has proven to be the best solution for ready-mix contractors, masons, decorative concrete specialists, tool rental companies, swimming pool contractors, and many more. If you use concrete, and you need to clean it from tools and equipment, Speedy Clean Concrete Dissolver is the product you need.

Does Speedy Clean Concrete Dissolver Contain Acid?
Speedy Clean Concrete Dissolver is acidic the way a lemon or an orange is, but it does not contain any acid. There is no muriatic or sulphuric acid in Speedy Clean Concrete Dissolver.

How fast does Speedy Clean CONCRETE DISSOLVER work?
Speedy Clean Concrete Dissolver normally works in 10 to 15 minutes depending on the application. The amount of soak time will really depend in the thickness of the material trying to be removed. The minimum should be about 10 minutes but thicker materials may take 30 or more and repeated applications. It is important to keep the material wet with the concrete dissolver and not let it dry.

Do I wet with water the items to be cleaned or etched?
DO NOT wet material before applying Speedy Clean Concrete Dissolver ever. You must apply it to the material when it is dry. Any water on the material will neutralize the effects of the concrete dissolver and it will not work.

Is Speedy Clean CONCRETE DISSOLVER classified a hazardous material?
Speedy Clean Concrete Dissolver is not classified as a hazardous material. It is 100% biodegradeable and can be shipped UPS or FedEx without any hazmat markings.

Instructions For Use


There are some simple guidelines to follow when using Speedy Clean CONCRETE DISSOLVER to clean your hand tools and equipment.

It is neutralized by water, so do not wet tools or equipment first.
If you are cleaning equipment on concrete, cover or wet it down first.
Always allow 10 to 15 minutes of continual soaking by the product.
After a good soaking with Speedy Clean use a stiff nylon brush and water.
The thickness of material will dictate if a second treatment is required.
A 2 gallon sprayer with a wand is a very effective applicator.
Some tools can be soaked in trays for 30 minutes or so.
After using the stiff brush, wash off with a hose or a pressure washer.
Though Speedy Clean is a nontoxic, biodegradable product and will not harm your skin, we always recommend that you wear protective gloves and eye protection. Fumes are minimal and not harmful so a respirator is not required. We do however urge anyone with respiratory issues to wear one.


Speedy Clean Concrete Dissolver is an excellent pretreatment to etch concrete for increased bonding capabilities. Below are some guidelines to follow.

Do not wet floor first
Apply with a wand sprayer evenly
Test a small area first to establish how much soak time is needed.
Soak time can be from 5 to 15 minutes depending on concrete age
When the time needed is determined, apply to rest of area with a sprayer.
When the etching time is up rinse with water to neutralize.
You may need to mop area to clean up all residue
Let area dry to the state needed by material being used.
Apply material

Speedy Clean will not harm paint, metal, or wood, only Portland Cement